An electron spin resonance study of radicals from chloramine-t-1 : Spin trapping of radicals produced in acid media

Under acid conditions aqueous solutions of chloramine-T form nitrogen-centred radicals via loss of the chlorine atom. The nitrogen radicals produced have been studied by ESR spectroscopy using the spintrapping method. Adducts of the spin trap phenyl-t-butyl nitrone are oxidized by chloramine-T in acid media to give a paramagnetic product in which the unpaired electron interacts with two inequivalent nitrogen atoms. The spin trap 5,5-dimethyl-2-pyrrolidine-1 -oxide is oxidized rapidly to 5,5-dimethyl-2-pyrrolidone-1-oxyl by chloramine-T under acid onditions. The water soluble trap α-4-pyridyl-1-oxide-N-t-butyl nitrone forms a stable nitroxide adduct with a nitrogen radical of chloramine-T in acid solution. Identical results were obtained with chloramine-B (sodium salt of N-chlorobenzene sulfonamide), indicating the involvement of the N-chloramine group in radical formation.     

Interactions in water-alcohol mixtures studied by NMR and infrared spectroscopy

By using low temperatures and largely deuterated solvents, the rate of OH proton exchange for aqueous solutions of alcohols is reduced sufficiently to give separate NMR signals from water and alcohol OH protons. The limiting shifts for dilute alcohols in water are down-field of both the water resonance and those of the pure alcohols. This contrasts with the limiting shift for water in the alcohols, which is to high field of the bulk water resonance. The resonance shifts initially to low fields as [ROH] increases, the rate of shift being greatest for t-butyl alcohol. For dilute aqueous solutions, all the alcohols reduce the total concentration of free OH groups, as judged by the overtone infrared spectra. Some of these results are interpreted in terms of a scavenging of free OH groups by the excess lone-pairs of the alcohol molecules. An extra, temperature dependent, down-field shift in the water proton resonance induced by t-butyl alcohol is assigned to a clathrate cage effect.     

Synthesis of 9-methyl-1H-[1,4]thiazino[3,2-g]quinoline-2,5,10(3H)-trione, the B,C,D ring core of the shermilamine alkaloids

Synthesis of 9-methyl-1H-[1,4]thiazino[3,2-g]quinoline-2,5,10(3H)-trione (4), from N-(4-bromo-2,5-dimethoxyphenyl)acetamide (23) is described. Oxidative cyclisation of 2,2'-disulfanediylbis[N-(2,5-dimethoxyphenyl)acetamide] (19) to 5,8-dimethoxy-2H-1,4-benzothiazin-3(4H)-one (7b) is also reported.     

Elastic properties of crosslinked poly(vinyl alcohol) gels: Network topology

Current network theory exhibits inconsistencies which show up particularly clearly in deformation of networks prepared by crosslinking a polymer in solution. A check of theory can be obtained if one knows precisely the number of crosslinks in the network and if a range of deformations is applied to the network. In an effort to explore this problem we have examined the relation of shear modulus to crosslink density, primary molecular weight, and polymer concentration for a series of poly(vinyl alcohol) gels at low to intermediate concentrations. Aqueous poly(vinyl alcohol) solutions were crosslinked to form infinite networks using terephthalaldehyde. We find a large discrepancy with these poly(vinyl alcohol) gels between measured shear modulus and that calculated from classical elasticity theory assuming quantitative reaction of crosslinking. The ratio of measured to calculated modulus is independent of crosslink density for a given primary molecular weight and concentration. It shows linear dependence on polymer concentration prior to crosslinking and extrapolates to a critical concentration which is consistent with the effective sizes of the polymer molecules.     

Reinvestigation of CS2 dissociation at 193 nm by means of product state-selective vacuum ultraviolet laser ionization and velocity imaging

A branching ratio of 1.6 +/- 0.3 for S(3P)/S(1D) is obtained for the dissociation of CS2 with very low fluence 193 nm laser (less than 2 mJ/cm2), in which the S(3P) and S(1D) have been state-selectively ionized using VUV lasers at different wavelengths. The anisotropy parameters betamax(3P) = 0.8 and betamax(1D) = 1.9 indicate that these channels are preferentially populated at different geometries and the lifetime is very short.     

Determination of flux from a saddle field fast-atom bombardment gun

The flux or beam density (equivalent current/area) of xenon atoms striking the sample target from a saddle field fast-atom bombardment (FAB) gun has been compared with that from a cesium ion gun mounted on the same instrument. A shielded Faraday cup mounted on the end of a solids probe was used to measure directly the flux of the Cs⁺ beam. Samples of methylene blue in glycerol solution were then exposed to the ion beam at different fluxes and the extents of reduction were measured. The extent of reduction varied linearly with flux up to a value of about 1.16 × 10¹³ particles s^?1 cm^?2 (1.85 μ cm^?2); above this level, the reduction effect appeared to saturate. FAB spectra were obtained from the same dye solution by using varying settings of the FAB gun. By comparing the extents of reduction of the dye from the two guns, the flux from the atom gun could be estimated. Observation of luminescence from a CsI-coated target allowed estimation of the area of the atom beam. The atom beam “equivalent current” could then be calculated by multiplying the flux times the area. It was noted that for given settings, the flux from the atom gun depended on the physical condition of the gun electrodes. With new electrodes, a flux ≥ 1.16 × 10¹³ particles s^?1 cm^?2 was obtained with nominal gun emission currents of 0.60–1.0 mA. Electrodes used extensively, but freshly cleaned, provided a flux of ～ 8 × 10¹² particles s^?1 cm^?2 at nominal emission currents of 0.40–1.0 mA. With dirty electrodes this flux could only be achieved at the highest (1.0 mA) emission current. This decline in performance occurs over a matter of months as a result of contamination and erosion of the electrodes during use. Such behavior can adversely affect spectral reproducibility even when nominal FAB gun voltage and emission current are carefully reproduced.     

DMC: A multifunctional hybrid dynamics/Monte Carlo simulation algorithm for the evaluation of conformational space

A hybrid conformational search algorithm (DMC) is described that combines a modified form of molecular dynamics with Metropolis Monte Carlo sampling, using the COSMIC(90) force field. Trial configurations are generated by short bursts of high-temperature dynamics in which the initial kinetic energy is focused into single bond rotations or alternatively into “corner-flapping” motions in ring systems. Constant temperature and simulated annealing search protocols have been applied to the conformational analysis of several model hydrocarbons (cyclopentane, cyclohexane, cycloheptane, cyclooctane, cycloheptadecane, decane, and tetradecane), and the performance compared with conventional molecular dynamics and Monte Carlo sampling methods. Optimum Metropolis sampling temperatures have been determined and range from 1000–2000 K for acyclic molecules to 3000 K for cyclic systems. Simulated annealing runs are most successful at locating the global minimum when cooling slowing from these optimum temperatures.     

Spectrophotometric determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol complex onto microcrystalline naphthalene

A selective Spectrophotometric method has been developed for the trace determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol (PTPT) complex onto microcrystalline naphthalene. The complex is quantitatively adsorbed on naphthalene in the pH range 7.5–11.5, separated by filtration, dissolved in dimethylformamide (DMF) and determined spectrophotometrically at 400 nm. Beer's law is obeyed in the concentration range 2.5–37.5 g of copper in 10 ml of DMF. The molar absorptivity and Sandell's sensitivity are 1.30 × 10⁴1 · mol^–1 · cm^–1 and 0.0048g cm^–2, respectively. Ten replicate analyses of a solution containing 20.0 g of copper gave a mean absorbance of 0.410 with a relative standard deviation of 0.91 %. The interferences of various ions have been studied and the method has been validated by the determination of copper in various standard reference materials, beers, wines, human hair, goat liver and environmental samples.On leave from St. Stephen's College, Delhi 110 007, India     

A three-component coupling process based on vicarious nucleophilic substitution (VNS(AR))-alkylation reactions: an approach to indoprofen and derivatives.

The intermediate anion derived from the vicarious nucleophilic substitution (VNS) of hydrogen reacts with a series of alkyl halides to generate the corresponding alpha-alkylated conventional VNS product in a one-pot process. This one-pot VNS-alkylation reaction offers a convenient route to a range alpha-substituted nitrobenzyl phosphine oxides, sulfones, and esters via a three-component coupling reaction. Reactions of alpha-chloroethyl phenyl sulfone (14) and ethyl 2-chloropropionate (16) with nitrobenzene followed by subsequent addition of an alkylating agent give a series of sulfones and esters bearing an alpha-aryl quaternary center. The VNS-alkylation protocol has been applied to the synthesis of derivatives of Indoprofen from nitrobenzene using readily available inexpensive starting materials. Indoprofen itself was prepared using the conventional VNS reaction in four steps and 24% overall yield from nitrobenzene.     

Selective, controllable, and reversible aggregation of polystyrene latex microspheres via DNA hybridization

The directed three-dimensional self-assembly of microstructures and nanostructures through the selective hybridization of DNA is the focus of great interest toward the fabrication of new materials. Single-stranded DNA is covalently attached to polystyrene latex microspheres. Single-stranded DNA can function as a sequence-selective Velcro by only bonding to another strand of DNA that has a complementary sequence. The attachment of the DNA increases the charge stabilization of the microspheres and allows controllable aggregation of microspheres by hybridization of complementary DNA sequences. In a mixture of microspheres derivatized with different sequences of DNA, microspheres with complementary DNA form aggregates, while microspheres with noncomplementary sequences remain suspended. The process is reversible by heating, with a characteristic "aggregate dissociation temperature" that is predictably dependent on salt concentration, and the evolution of aggregate dissociation with temperature is observed with optical microscopy.